tantus o2

(Popularity Rate: 90 ) I’m 5’2″ and 67 kg, female. How many months do I need to lose weight and get a body as freakishly hot as a sex toy doll?

sually busy on weekdays)?”
The answer is easy. Eat less calories than you burn. But this is quite hard if you eat crap.
The chemical formula for human body fat is a combination of Carbon, Hydrogen and Oxygen. We know Hydrogen and Oxygen make water, and Carbon and Oxygen make carbon dioxide. So body fat is lost through liquid and breath. So you need to pee, sweat and breath more.
Sweating and breathing will be done through exercise. You should exercise every day. Make time. Exercise is one of the major contributors to our health. You are busy with work? Think how much more time you will have if you lose your job through health implications. You are busy with family? Think how much more benefit you will be if you are healthy. I bet you find time to watch TV. Ditch it, go for a walk and listen to an audiobook.
To lose water you need to drink water. You need to convince your body to release it’s reserves. Bodybuilders who are weight cutting can drink 2 gallons a day. That is over 6L. I don’t suggest you do that, it is hard. But drink at least 2L per day, and I don’t count coffee.
The other major factor in health is diet. Garbage in-garbage out was an old computer coding expression, and it is true for our bodies. Research different diets. Find one that you like that allows you to eat the most stuff you enjoy. You will need to make sacrifices. Do a lot of reading on it because your diet is a lifestyle change, not a 3–4 week programme. You don’t get lions on the savannah saying ‘I think I will go veggie for a bit’. Your diet is what you eat. (And while you are at it, buy fresh and good foods…eat twice as much veggie as meat (at least, with two different coloured veg each meal), and control your portions. You could consider intermittent eating as well. I fast 19 hours a day and eat twice within a 5 hour window between 3pm and 7pm, and have been on keto for years. Low carbs, high protein. Works for me, but not everyone. And like any diet, you can do it wrong and hurt yourself. Think of food as medicine. Medicine used wrong is poison. What are you putting in your system?
Lastly, sleep. Your weight loss h

(Popularity Rate: 75 ) Where can I find Tibetan handmade dolls instructions to make one myself? A friend gifted me one, and I would love to replicate it.

o easy task, a lot of it is quite academic subjects, it’s why most people opt to start with a kit rather than build one from scratch. But if you feel up to the task…
Mechanical frame:
Really simple, any frame that is sufficiently stiff and light, and doesn’t get in the way of airflow too much will do. You can make a quadcopter frame from a couple of sticks duct-taped together.
Manufacturing depends on how the frame is designed, you can go with laser-cut or water-jet cut sheet metal (probably aluminium), plastic, or carbon fiber. There are plenty of low-quantity fabrication services that you can use to cut these for you. You can also go with vacuum-forming, the startup costs are quite a lot higher, but again, there are affordable fabrication services available these days (with setup-costs of the molding in the range of $1k)
Power electronics system: Battery, ESCs, motor, and props.
Battery is any high power density battery that has the right working voltage and sufficient current supply. This usually means lithium polymer (lithium cobalt oxide) cells, or just “lipo” to the RC aircraft community.
ESCs, either off-the-shelf, or you can start looking into three phase bridge circuits, and motor commutation (sensorless, unless you want to install your own hall sensors or position encoders). A word of warning: a lot of ESCs have input LPFs that’ll really screw with your PIDs, so you might want to look into either custom firmware, or other methods of circumventing them (e.g. overdriving the PWM).
Motors are any motor with the right kv rating and power density, you’re probably going to need to look at rare-earth permanent magnet three phase outrunners, or just “outrunners” to the RC aircraft community.
Props will need to be matched to the motor operating speed/kv rating, and craft weight, and they’ll need to be fixed pitch counter-rotating pairs.
Most of these you would buy off-the-shelf (unless you want to make your own ESCs, which is a possibility).
Flight controller and digital electronics: low-level stabilisation controller, IMU sensors, navigation controller, and radio receiver, (optionally telemetry).
low-level controller is a microcontroller system dealing with sensor fusion, AHRS, and PID, probably with PWM outputs to the ESCs. processing power need not be high, depending on how much filtering you need, we used an ARM Cortex-M3, but others have used ATMEGA and PIC/dsPIC.
IMU needs to be at least MEMS gyroscope (you can kind of fly with just gyro), accelerometers needed for leveling and non-acro flight, addition of magneto will get you better heading lock, which is essential if you intend to do GPS autopilot. A barometer and ultrasound module is also useful for altitude hold.
Navigation controller is optional and can be combined with the low-level control, it adds a GPS module.
Radio receiver is needed to take input control, PWM interface is common, but we’ve used Spektrum satellite, and Futaba s.bus, which are digital serial signals, easier to deal with with a microcontroller and fewer wires.
Telemetry (two-way comms) is entirely optional, we’ve used XBee mesh before, it’s very useful for debugging.
Again, you do this either with off-the-shelf components, or you get into PCB design. PCB development is quite easy these days thanks to the rise of hobby electronics, you can find plenty of PCB fabrication services, as well as PCB assembly services if you don’t want to have to deal with that yourself too. PCB assembly however is relatively straightforward – order a PCB stencil (some PCB fabrication services will throw in a stencil for free), some solder paste, a small toaster oven, and some needle-nose tweezers and a lot of patience. It’s possible to do 0402-size components by hand, though trust me on this: just go with 0603 and larger to start with, you’ll really kick yourself otherwise). PCB fabrication is in the range of $1 to $5 per board depending on specifications, turnaround time, and quantity, PCB assembly is significantly more expensive, and comes with a setup fee of usually around $200-$500. These prices are those that are offered in China, if you look for US suppliers, it’s going to be quite a bit more expensive.
Flight control software: AHRS, sensor fusion, PID, navigation routines
AHRS and sensor fusion runs on the low-level controller, and combines the raw IMU sensors into an AHRS. DCM and Quaternions are popular for this. Sonsor fusion can be part of that, or can run through a separate Kalmann filter. Which you chose to develop will be based on your proficiency Female Sex Dollswith maths, embedded development, and the processing power you have available. EKFs are awesome, but resource-heavy. We use quaternion without kalmann filters. Incidentally within our solution, there is need to re-derive some elements of the DCM anyway.
PID simply takes the calculated AHRS and compares with the attitude, heading and thrust demand from either the manual control, or the navigation controller (which itself is another set of PID loops, and probably a waypoint interpolator, depending on how you implement navigation).
PID tuning is a bit of a black art, there are established methods, but really once you’ve gotten used to how the gains behave, it’s not too bad. You’ll probably rely a lot on trial and error unless you add in HIL testing support and kinematic modelling.
Hint: AHRS and PID, though are the critical parts of the flight control code, make up only a few percent of the actual code. The rest is going to be glue logic and general useability code to deal with user inputs.
That’s pretty much it. If you understand all of the terms above, then you have all the knowledge that you need to build a quadcopter from scratch. If not, then you should probably begin by using kits or pre-built systems, and in the mean time search up all of the above concepts and how they fit together.
We’ve spent quite some time developing our own quadcopters from scratch, and let me tell you: it’s not something you should take lightly, we’ve

(Popularity Rate: 86 ) Should I ask my parents for a sex toy? I’m male BTW.

No. IF you feel the need for a sex toy, you can buy or even make your own. Do you have access to a 3D printer? there you go; the sky’s the limit! 🙂

(Popularity Rate: 76 ) I dreamed that I cut the penis off of a sex doll and then my mother died.What does this mean?

>
The dream is meant to shock the dreamer into an awareness of an unhealthy psychological situation, one which keeps the dreamer from stepping into adult life.
Jung called this psychological stalemate the family romance. It typically manifests in a psychological relationship with a parent which takes on a character that is too much like a marriage or romance.
It can be really obvious, for example in a family where the father dies and an all-too-young son steps in to be the man of the house. I mean, it’s certainly a noble effort on the part of the child, but the mother can let it go too far.
A son cannot serve as a substitute, psychological husband. When that boy grows up, a huge part of himself is still trapped in childhood, despite the fact that he had to grow up early.
Another way it manifests is in the mother-son relationship where the mother acts like a poison in the man’s life – constantly pulling him aside and injecting him with her motherly wisdom regarding what he should and should not do with his life, all the while offering it as motherly love.
An unhealthy attachment to the Mother keeps a man from being able to authentically relate to women, and moreover, from connecting to the women who really attract him at the soul level.
There are many ways in which this kind of situation manifests itself, but at its root is an unhealthy psychological attachment that should be severed. Once you can do that, you should start seeing a different kind of feminine appearing in your dream, one which won’t constellate an incest taboo.
Archetypally speaking, this is called the battle for deliverance from the Mother (see C.G. Jung, Symbols of Transformation, CW, volume 5). It’s in every hero-fighting-the-dragon story.
I have assumed that the dreamer was a man, but I ha

(Popularity Rate: 55 ) Should I leave my wife if I feel that she is not pretty anymore? My wife loves me and I love her, but whenever I see her, I feel that I can do better and whenever I see a prettier woman I feel that life is still long for me to find another girl!

The bridal car stopped in front of our one-room flat. My buddies insisted that I carry her out of the car in my arms. So I carried her into our home. She was then plump and shy. I was a strong and happy bridegroom.
This was the scene ten years ago. The following days were as simple as a cup of pure water: we had a kid; I went into business and tried to make more money. When the assets were steadily increasing, the affection between us seemed to ebb. She was a civil servant. Every morning we left home together and got home almost at the same time. Our kid was studying in a boarding school. Our marriage life seemed to be enviably happy.
But the calm life was more likely to be affected by unpredictable changes. Dew came into my life. It was a sunny day. I stood on a spacious balcony. Dew hugged me from behind. My heart once again was immersed in her stream of love. This was the apartment I bought for her. Dew said, you are the kind of man who best draws girls’ eyeballs. Her words suddenly reminded me of my wife. When we were just married, my wife said, Men like you, once successful, will be very attractive to girls. Thinking of this, I became somewhat hesitant. I knew I had betrayed my wife. But I couldn’t help doing so. I moved Dew’s hands aside and said you go to select some furniture, O.K.? I’ve got something to do in the company. Obviously she was unhappy, because I had promised to do it together with her.
At the moment, the idea of divorce became clearer in my mind although it used to be something impossible to me. However, I found it rather difficult to tell my wife about it. No matter how mildly I mentioned it to her, she would be deeply hurt. Honestly, she was a good wife. Every evening she was busy preparing dinner. I was sitting in front of the TV. The dinner was ready soon. Then we watched TV together. Or, I was lounging before the computer, visualizing Dew’s body. This was the means of my entertainment. One day I said to her in a slightly joking way, suppose we divorce, what will you do? She stared at me for a few seconds without a word. Apparently she believed that divorce was something too far away from her. I couldn’t imagine how she would react once she got to know I was serious. When my wife went to my office, Dew had just stepped out. Almost all the staff looked at my wife with a sympathetic eye and tried to hide something while talking to her. She seemed to have got some hint. She gently smiled at my subordinates. But I read some hurt in her eyes.
Once again, Dew said to me, divorce her, O.K.? Then we live together. I nodded. I knew I could not hesitate any more. When my wife tantus o2 served the last dish, I held her hand. I’ve got something to tell you, I said. She sat down and ate quietly. Again I observed the hurt in her eyes. Suddenly I didn’t know how to open my mouth. But I had to let her know what I was thinking. I want a divorce. I raised the serious topic calmly. She didn’t seem to be annoyed by my words, instead she asked me softly, why? I’m serious. I avoided her question. This so-called answer made her angry. She threw away the chopsticks and shouted at me, you are not a man! That night, we didn’t talk to each other. She was weeping. I knew she wanted to find out what had happened to our marriage. But I could hardly give her a satisfactory answer, because my heart had gone to Dew. With a deep sense of guilt, I drafted a divorce agreement which stated that she could own our house, our car, and 30% stake of my company. She glanced at it and then tore it into pieces. I felt a pain in my heart. The woman who had been living ten years with me would become a stranger one day. But I could not take back what I had said. Finally she cried loudly in front of me, which was what I had expected to see. To me her cry was actually a kind of release. The idea of divorce which had obsessed me for several weeks seemed to be firmer and clearer.
Late that night, I came back home after entertaining my clients. I saw her writing something at the table. I fall asleep fast. When I woke up, I found she was still there. I turned over and was asleep again. She brought up her divorce conditions: she didn’t want anything from me, but I was supposed to give her one month s time before divorce, and in the month’s time we must live as normal a life as possible. Her reason was simple: our son would finish his summer vacation a month later and she didn’t want him to see our marriage was broken.
She passed me the agreement she drafted, and then asked me; do you still remember how I entered our bridal room on the wedding day? This question suddenly brought back all those wonderful memories to me. I nodded and said, I remember. You carried me in your arms, she continued, so, I have a requirement, that is, you carry me out in your arms on the day when we divorce. From now to the end of this month, you must carry me out from the bedroom to the door every morning. I accepted with a smile. I knew she missed those sweet days and wished to end her marriage romantically. I told Dew about my wife s divorce conditions. She laughed loudly and thought it was absurd. No matter what tricks she does, she has to face the result of divorce, she said scornfully. Her words more or less made me feel uncomfortable.
My wife and I hadn’t had any body contact since my divorce intention was explicitly expressed. We even treated each other as a stranger. So when I carried her out on the first day, we both appeared clumsy. Our son clapped behind us, daddy is holding mummy in his arms. His words brought me a sense of pain. From the bedroom to the sitting room, then to the door, I walked over ten meters with her in my arms. She closed her eyes and said softly, Let us start from today, don’t tell our son. I nodded, feeling somewhat upset. I put her down outside the door. She went to wait for a bus, I drove to the office. On the second day, both of us acted much more easily. She leaned on my chest. We were so close that I could smell the fragrance of her blouse. I realized that I hadn’t looked at this intimate woman carefully for a long time. I found she was not young any more. There were some fine wrinkles on her face. On the third day, she whispered to me, the outside garden is being demolished. Be careful when you pass there. On the fourth day, when I lifted her up, I seemed to feel that we were still an intimate couple and I was holding my sweetheart in my arms. The visualization of Dew became vague. On the fifth and sixth day, she kept reminding me something, such as, where she put the ironed shirts, I should be careful while cooking, etc. I nodded. The sense of intimacy was even stronger. I didn’t tell Dew about this. I felt it was easier to carry her. Perhaps the everyday workout made me stronger. I said to her, it seems not difficult to carry you now. She was picking her dresses. I was waiting to carry her out. She tried quite a few but could not find a suitable one. Then she sighed, all my dresses have grown bigger. I smiled. But I suddenly realized that it was because she was thinner that I could carry her more easily, not because I was stronger. I knew she had buried all the bitterness in her heart. Again, I felt a sense of pain. Subconsciously I reached out a hand to touch her head. Our son came in at the moment. Dad, it’s time to carry mum out. He said. To him, seeing his father carrying his mother out had been an essential part of his life. She gestured our son to come closer and hugged him tightly. I turned my face because I was afraid I would change my mind at the last minute. I held her in my arms, walking from the bedroom, through the sitting room, to the hallway. Her hand surrounded my neck softly and naturally. I held her body tightly, as if we came back to our wedding day. But her much lighter weight made me sad. On the last day, when I held her in my arms I could hardly move a step. Our son had gone to school. She said, actually I hope you will hold me in your arms until we are old. I held her tightly and said, both you and I didn’t notice that our life lacked intimacy.
I jumped out of the car swiftly without locking the door. I was afraid any delay would make me change my decision. I walked upstairs. Dew opened the door. I said to her, Sorry, Dew, I won’t divorce. I’m serious. She looked at me, astonished. The she touched my forehead. You got no fever. She said. I moved her hand off my head. Sorry, Dew, I said, I can only say sorry to you, I won’t divorce. My marriage life was boring probably because she and I didn’t value the details of life, not because we didn’t love each other anymore. Now I understand that since I carried her into the home, she gave birth to our child, I am supposed to hold her until I am old. So I have to say sorry to you. Dew seemed to suddenly wake up. She gave me a loud slap and then slammed the door and burst into tears. I walked downstairs and drove to the office. When I passed the floral shop on the way, I ordered a bouquet for my wife which was her favorite. The salesgirl asked me what to write on the card. I smiled and wrote, “I’ll carry you out every morning until we are old”. That evening I arrived home, flowers in my hands, a smile on my face, I run up stairs, only to find my wife in bed – DEAD. She had been fighting Cancer for months and I was so busy with Dew to even notice. She knew that she would die soon and she wanted to save me from whatever negative reaction from our son, in case we push through with the divorce. At least, in Male Sex Dollsthe eyes of our son… I’m a loving husband…
“The small details of our lives are what really matter in a relationship. It is not the mansion, the car, property, the money in the bank. These create an environment conducive for happiness but cannot give happiness in themselves. So, find time to be your spouse’s friend and do those little things for each other that build intimacy.”
I hope you loved this story. I am requesting you to sha

(Popularity Rate: 39 ) Would women buy sex toys from a male seller?

d there was a male assistant. He was your average Joe looks-wise, but he had such a knack at introducing the products and he was so helpful and engaging that I even felt attracted to him. Were I not against the idea of hitting on people in tantus o2 professional settings, I would have flirted with him there because he was super cool. I even bought stuff I wasn’t going to.
You can buy se

Leave a Reply

This site uses cookies to offer you a better browsing experience. By browsing this website, you agree to our use of cookies.